mail

Author Topic: banging noise on down shift  (Read 1421 times)

0 Members and 1 Guest are viewing this topic.

Offline jspeez13

  • Eagle
  • **
  • Posts: 40
  • Thumbs Up 2
banging noise on down shift
« on: June 12, 2013, 12:30:02 PM »
im getting a banging noise on down shifts and kind of a popping noise on hard acceleration.  Its like the t-case is banging into the floor pan or something..  i looked at the motor mounts and the tranny mount seemed good when i swapped the tranny over the winter.  any guesses or similar experiences?

Offline Amc1320

  • Eagle DL
  • ***
  • Posts: 206
  • Thumbs Up 20
Re: banging noise on down shift
« Reply #1 on: June 12, 2013, 04:39:27 PM »
I was getting that, replaced the transmission mount, it had collapsed and the tcase was hitting the skid plate a little from time to time

New tranny mount and noise all gone!

Also if you have an automatic you cant easily find (or afford) a tranny mount, buy the one for a manual, it works find with a little modification. Search it here on the nest
Rob
Rob c
84 Eagle Limited
78 AMX
81 Spirit
Manchester, TN

Offline carnuck

  • AMC Eagle Nest Addicted
  • ********
  • Posts: 1747
  • Thumbs Up 55
  • Near Seattle
    • Virtual Jeep
Re: banging noise on down shift
« Reply #2 on: June 14, 2013, 01:28:05 PM »
Quick test. Use a load strap around the crossbar and trans cinched down tight. If the noise goes away, you found the problem. If not, check the left strut bracket for cracks and worn out bushings.
FOR SALE
'87 Comanche 4.0L AW4/NP242 3.73 gears, lifted 5" on near new 33" tires $3500 obo
'82 Eagle Wagon (Brown Betty) 4.2L/727/NP229 and soon 8.25 rear axle and non-vacuum 3.08 front to match. 235/75/15 tires. It's down to minor body work (someone creamed my driver's door but I have another in good shape) almost rust free and interior work (seats are worn and carpet torn). $2000 but about to go up due to more work being done.

Pics of my other for sale stuff http://tinyurl.com/jimsclads

Offline jspeez13

  • Eagle
  • **
  • Posts: 40
  • Thumbs Up 2
Re: banging noise on down shift
« Reply #3 on: June 14, 2013, 03:15:48 PM »
ill try that! thanks

 

Not mine! Sale on posilok front diff shift cables

Started by carnuck

Replies: 0
Views: 1139
Last post February 13, 2013, 12:12:12 AM
by carnuck
Vacuum shift actuator replacement?

Started by Softbuster

Replies: 33
Views: 9739
Last post July 28, 2012, 12:07:53 PM
by carnuck
Vaccum shift motor available?

Started by shanebo

Replies: 0
Views: 937
Last post February 27, 2011, 12:55:49 AM
by shanebo
tc case shift motor

Started by neweagle

Replies: 1
Views: 1166
Last post November 19, 2011, 10:17:05 PM
by carnuck
about the shift motor

Started by leeSmith

Replies: 1
Views: 1363
Last post February 20, 2011, 07:32:20 AM
by IowaEagle