Author Topic: shordy header with stock intake problum  (Read 2006 times)

0 Members and 1 Guest are viewing this topic.

Offline Demigawd

  • Eagle DL
  • ***
  • Posts: 212
  • Thumbs Up 4
shordy header with stock intake problum
« on: April 27, 2011, 12:54:51 PM »
i got a shorty head for a jeep a wile back and test fit it on my head with my intake manifold today there's a slight problem Ive encountered ill take some pics and describe whats happened that I'm concerned about

here is the header shiny new beautiful

here it is on my 7120 cast 93 4.0 jeep head

here it is with the intake manifold attached almost looks good right?

here's my problem

and here's a couple pics of the cause couldn't get the lighting right



see that lil screw in the bottom of the intake manifold its bumpin grindin on my darn header! I'm not sure if i just screw it more in if it will fix the problem or take it out grind it down so its not sticking out as far or if i just need to put a dent in the header I'm not sure what that would do to its flow tho

any suggestions?

Offline shaggimo

  • AMC Eagle Nest Addicted
  • ********
  • Posts: 1951
  • Thumbs Up 89
  • When "6" just won't do.......
Re: shordy header with stock intake problum
« Reply #1 on: April 27, 2011, 01:12:41 PM »
Personally I would grind the plug a bit so it will clear your header, I'd rather grind on a $1 plug than dent a $300 header, lol.
88 xj cherokee- ((4)(4))2
81 malibu 4dr- Identity Crisis
81 SX4- gf's
84 Eagle 4dr sedan- it followed me home... ::)

Offline eaglefreek

  • Moderators
  • AMC Eagle Nest Addicted
  • *****
  • Posts: 2756
  • Thumbs Up 146
Re: shordy header with stock intake problum
« Reply #2 on: April 27, 2011, 01:56:39 PM »
That sure is purtty. I would assume that is for a 99+ Jeep and made to work with the efi manifold. Hope you can figure it out. Have you already figured out if you will be able to clear the front diff and steering shaft with the dual outlets?
« Last Edit: July 18, 2011, 11:31:24 AM by eaglefreek »
"I know he'd be a poorer man if he never saw an eagle fly,
Rocky mountain high"  John Denver
Click for Fayetteville,TN Forecast" border="0" height="100" width="150

Offline Demigawd

  • Eagle DL
  • ***
  • Posts: 212
  • Thumbs Up 4
Re: shordy header with stock intake problum
« Reply #3 on: April 27, 2011, 02:07:52 PM »
its a 2000-2006 header and it will clear the steering shaft and the front diff if the stock intake wasn't warped stock it would fit fine its cause the intake ports on the left are angled up and the ones on the right are angled down may have to get a different intake if i  cant get this one to work but ill figure something out, if i can get them to sit flat on the head is it alright for the intake manifold to touch one of the exhaust pipes? or would the heating up on the intake cause problems?

Offline Demigawd

  • Eagle DL
  • ***
  • Posts: 212
  • Thumbs Up 4
Re: shordy header with stock intake problum
« Reply #4 on: May 12, 2011, 03:17:12 PM »
Update! So I have my intake manafold exaust header problum solved! There was a couple other spots the intake touched the exauset pipes but with minor grinding on the intake and slight denting of the header (nothing that will mess up the flow) it all pans out to a nice snug fit I'm happy to say I found the header for only 180 dollers by searching for a shordy header for a 2000-2006 jeep probably going with a duel exaust if I can get it to work may end up with just a single exaust thow.


1980 intake manifold 1985 exhaust manifold???

Started by 85AmCfreak

Replies: 9
Views: 3253
Last post March 20, 2012, 10:20:45 AM
by BenM
any suggestions for headers? or stick with the stock manifold?

Started by eagle4x4

Replies: 3
Views: 1883
Last post May 30, 2012, 05:15:42 PM
by olymunch
engine sputtering from intake manifold gasket?

Started by amceagledude

Replies: 1
Views: 1205
Last post July 15, 2011, 08:32:09 PM
by vangremlin
Jeep header

Started by SS eagle

Replies: 4
Views: 1484
Last post March 30, 2011, 09:59:49 AM