Author Topic: Swapping 2.35 gears out of the front... questions  (Read 19311 times)

0 Members and 1 Guest are viewing this topic.

Offline anrkii

  • Eagle
  • **
  • Posts: 45
  • Thumbs Up 12
Re: Swapping 2.35 gears out of the front... questions
« Reply #60 on: June 05, 2012, 04:46:12 AM »
Are you saying that a CJ carrier will work? I dropped my 235 unit at the shop along with a 354 xj carrier and gears without doing my homework first. whoops.
Can anyone else confirm/deny usage of a cj carrier?

Offline PR1AWRet

  • Eagle
  • **
  • Posts: 25
  • Thumbs Up 2
Re: Swapping 2.35 gears out of the front... questions
« Reply #61 on: June 05, 2012, 12:13:15 PM »
The CJ carrier/gears won't work with the 2.35 carrier AND/OR 2.35 axle out of the Eagle.  Any other gear ratio/axle (2.73, 3.07, 3.54) will work from an Eagle (Anything lower, like 3.73-4.88 will require the carrier for those ratios but will fit in the Eagle axle.)  If you have a 2.73 carrier AND axle per se, you can use the CJ gears in it as with any CJ carriers/differentials. Detroit Locker, Ox Locker, ARB Locker, Detroit Trutrac (posi) etc.

Offline anrkii

  • Eagle
  • **
  • Posts: 45
  • Thumbs Up 12
Re: Swapping 2.35 gears out of the front... questions
« Reply #62 on: June 06, 2012, 12:15:37 PM »
so its true that the entire 235 axle housing is the problem then?
Crap.

 

source for stock front axle disconnect vacuum motor

Started by BlueEagle

Replies: 13
Views: 1929
Last post January 07, 2013, 12:44:47 PM
by BlueEagle
slight whistle noise after new front axle and hub

Started by maximus7001

Replies: 10
Views: 3080
Last post August 23, 2011, 01:27:42 PM
by maximus7001
front axle clicked till it went out

Started by pigonawing

Replies: 13
Views: 2962
Last post April 12, 2011, 12:45:10 AM
by tougeagle
removing front differential cover

Started by eagleman

Replies: 3
Views: 768
Last post May 19, 2012, 01:04:36 PM
by carnuck
Front bearing replacement

Started by leftover

Replies: 17
Views: 5849
Last post May 02, 2011, 04:43:12 PM
by fulsizjeep